Quote:
Originally Posted by qubansailor
This is what I have planned thus far:
1. DO kit (single DO10 nozzle)
2. DO progressive controller
3. Aquamist flow sensor (which will tap into the procede)
4. 2.5 gl tank w/ float sensor
If you think I'm forgetting anything or have any special considerations please let me know.
|
I think that is good for a PPS kit that will work with the procede, and also be able to migrate to the BMS piggyback should you ever choose that route. Just find someone to help you with the DO progressive controller connections. Once it is setup, go read rob's threads on improving the connectors.
The PWM systems are good, I have one sitting in the garage (vishnu) and have not installed it in a couple years. Right now basically serving as a box with a 2nd pump in case mine quits.
Vishnu PWM is not really transferable to another tune as I understand it, although you can use some parts to build something else.
Aquamist HFS-4 is another good PWM system that can be used with more than 1 tune.
I like my PPS for now, served me well for a few years so far. If ever feel the need may go with Aquamist HFS-4 sometime in the future.