Quote:
Originally Posted by Mexcar007
For me, the Gear/! error is gone, but I still haven't been able to disable the DRL, and the DRL high beam light is now at full strength as opposed to dimmed per normal.
Dim the DRL - if you change from wert_01 your high light are 100-80% but wert_02 is dimmed to about 18%
DRL_WERT_DIMMUNG
wert_02
Diable the DRL
DRL_V_GEDIMMT
nicht_aktiv
P>S> these are located in the FRM module
|
Thanks Mexcar007...I'll give it a try tomorrow...I've sworn on coding the main CAS itself!...had much better experience coding sub-modules...