Quote:
Originally Posted by JamesM3M5
You will need to drain some coolant. When I did it, I removed the fan, the undertray, and the intercooler. I took the time to clean the sand, bugs, and dirt out of the IC. The fan may get covered in oil when you unbolt the oil lines. You can drain some of the coolant by unscrewing the radiator drain once the IC is out of the way.
Yes, you will need to pull the manifold out of the way. You can use a T6 or T8 Torx socket to pull the studs out of the head instead of having to lift the manifold up so far.
|
yupp planning to do it next oil change