Quote:
Originally Posted by joro2077
I guess, because it smelled like burning rubber and I freaked out cause he lied that he has the special tool thanks I'll go to home depot again tomorrow
|
Bet the mech didn't lube 'em. I used silicone grease....others use soap. Some use soapy water spray.
One thing: All 4 subframe/bushing bolts should be threaded in several turns to start.....then just snugged....then torqued.
If bushings were lubed, should go the last 0.5" no prob. Naturally the tool's preferred.
Good luck!