BMW 3-Series (E90 E92) Forum - View Single Post

johnlaviola · 02-23-2014, 08:13 PM

Sorry to start yet another INPA problem thread, but I'm running V5.0.2 on a Win 7 (64 bit) with a new $99 "USB K+DCAN USB Interface (INPA Compatible)" cable from One Stop.

I followed the DIYs posted here exactly (environment, path, interface in the EDIABAS.ini, etc.), with the exception of the serial port FIFOs as none are applicable for the USB cable driver. I set the USB Port properties for COM1 and set the latency to 1 msec per the One Stop installation instructions. When I start INPALoad the battery indicator is ON but the ignition is OFF.

I'm working with "E90" as my car is a 2008 335XI. Despite the startup issue, I tried to proceed and select e90 / F9 getting the appropriate dialog. If I double click 'airbag' I get an "IFH-003 ...interface interrupted" fault. I wasn't expecting it to work!

Any ideas on troubleshooting further would be greatly appreciated! Help!

02-23-2014, 08:13 PM	#1
johnlaviola New Member 0 Rep 6 Posts Drives: 335XI Join Date: Aug 2013 Location: Orange, CT iTrader: (0)	INPA startup errors Sorry to start yet another INPA problem thread, but I'm running V5.0.2 on a Win 7 (64 bit) with a new $99 "USB K+DCAN USB Interface (INPA Compatible)" cable from One Stop. I followed the DIYs posted here exactly (environment, path, interface in the EDIABAS.ini, etc.), with the exception of the serial port FIFOs as none are applicable for the USB cable driver. I set the USB Port properties for COM1 and set the latency to 1 msec per the One Stop installation instructions. When I start INPALoad the battery indicator is ON but the ignition is OFF. I'm working with "E90" as my car is a 2008 335XI. Despite the startup issue, I tried to proceed and select e90 / F9 getting the appropriate dialog. If I double click 'airbag' I get an "IFH-003 ...interface interrupted" fault. I wasn't expecting it to work! Any ideas on troubleshooting further would be greatly appreciated! Help!
	Appreciate 0 Tweet Quote