Selling a set of Eibach Pro Kit springs for 335i sedan/coupe. Also includes E36 M3 bump stops which are .5" shorter than OEM to allow for more suspension travel (this is better than cutting and is what Dinan uses on their suspension kits). Also includes OEM rear bump stops which have been trimmed about .75" per Eibachs instructions. This way you can keep your original components in tact if you plan to go back to stock some day. Springs and bump stops have about 8K miles on them.
The rear springs have been cut 1/2 coil on one side and 3/4 coil on the other. Why? When initially installed the springs were too high in the rear, causing a very raked appearance. I spoke with Eibach tech support and they said because this is a linear rate spring, cutting a small amount will make no performance difference. The springs seat perfectly in the spring cup and I drove 8K and nearly a year on them with zero issues. This way the car sat perfectly evenly with all wheel gaps within 1/8" of each other. Stance was perfect - low, but not too low, and handling was great.
Price: $150 for front springs/bump stops only or $200 for all 4 springs and bump stops.
