[RiXst3r]

Originally Posted by scalbert

Change the plug for cylinder 6 and if it still occurs, move the coil pack to another cylinder and see if the problem moves with it. Sounds like either a plug or coil pack is marginal and and becomes visible with the extra load from the PROcede.

he already did that...

Originally Posted by jusbechillin

So I ordered the special tool to remove the spark plug and replaced spark plug #6. I also swapped coil pack #1 with #6. I still throw code 306 and have limp mode almost any time I get on it. I have also cleared the code and took it to service and they found no problems... They also ran a stress test on the fuel pump.