04-16-2013, 09:27 PM
|
#17
|
Banned
Drives: T0PL3SS BIMM3R
Join Date: Nov 2012
Location: VVest Coast
|
Quote:
Originally Posted by jaykayelemenohpee
I took the pipe with the clamp out and wedged a baby flat head under it and pried it off at the seam. As for the radiator support you took out, put it back in. You've already done much more work than you need to. All you should need to do is take the pan off the bottom, remove the stock IC, and swap it for your new IC and tighten the clamps. Might need to trim the fan shroud depending on the IC. No need to disassemble the front end to do it.
|
thanks
|
|
|