Quote:
Originally Posted by kaigoss69
Every sub is different! Give it time. However, I recommend that when you do the calibration, that the sub not be present. So let the underseats play all the way down. Then after the calibration, hook-up the sub. I recommend you set the amp HP/LP at 80Hz, 24dB/oct. Also, you may want to switch the polarity of the sub!
|
Kaigoss, Thanks I appreciate it you guys have been a great help.
I will leave everything in the MS8 where its at and just re-calibrate with no sub present.
Once thats done ill re-connect the sub and enjoy it at lower volumes for a little.
Ill also try swapping the +/- ( polarity ) at the amp to see what gives better results.
I was under the impression calibrating with it missing the sub-frequencies it would affect the tune w/your method.
Will try and update thread asap.