Quote:
Originally Posted by MFKN3
JD,
Do they make an M3 fitment? I assume 380 front, 355 rear with track pads. My track wheels are 18" Apex ARC-8, which fit 380 stoptech's up front, but not 380 brembos. So not sure about nashi.
Do the "sport" pads squeal or dust more than the street?
|
Hey mate,
yes Nashin have rotor hat offsets and caliper mounts specific to the M3.
You could indeed run that combo, however I am not at all confident a 380 mm/N7 caliper setup will clear a 18" wheel.
I'll dig up a 380/N7 caliper application template if you like.
The other option is to run a 370 mm/N5 caliper on the front which should have adequate clearance, as the caliper body is smaller than the N7 but it's still a 6 piston caliper.
We would supply the kit with the upgraded "Sport" pads front and rear for track use.
The "Sport" pads have been known to squeal initially, but once the rotor face/pad surface has been properly bedded in and subsequently beaten on a few times, they are not really an issue. The dusting is only marginally more than the "Street" version too, which is to say they are quite good in that regard.
In short the sports are the better pad for track days, whilst still being well mannered enough for use on the street.
Cheers,
Justin.