Just finished the install
Couple things Id like to mention.
1. I did his method of sticking my fingers thru the top by the windshield not a big deal.
2. i couldn't get a ratchet to work on the 10mm nut so i used an open ended wrench
3. make sure you use the smaller black clip not the large one. i accidentlly used the big black clip and was staring at it for like 15 minutes wondering why it wasn't powering on till i realized there was a green/white wire on the smaller clip.
4. i used the hard wire kit included with the v1 nothing else nothing different
otherwise everything works fine. sunroof works doesn't shut off the detector so all good there.
Last edited by gerardm; 07-08-2009 at 04:57 PM..
|