Quote:
Originally Posted by kiwi29
Have you ever seen it dull polishes or chrome? A buddy of mine told me its better to just set aside 1 full day and hand clean the wheels with a very light dilution of water and a few drops of dawn dish soap. Can I dilute sonax or iron x so it'll be safer?
|
Do you know if it is polish aluminum of chrome???? One way to tell is to rub a little polish with a yellow applicator on the wheel. If the applicator turns black then it is polish aluminum. If it doesn't then it is probably chrome. Your wheels might also be anodized wheels. You might have to check with the manufacturer.
Chrome wheels could stand some strong wheel cleaner (even acid base) but I would not use IronX on it since it might dull the finish. Chemical Guys Diablo and Amazing Roll-off are the products I use to get most wheels clean. When all else fails, I break out the Meg D140. All of these products could be dilute to suit your needs and quite economical in the long run.
Un-coated Polish Aluminum is the most susceptible to dulling or staining by strong cleaning agents. Use a cleaner that is safe for all wheels (including un-coated metal). CG Diablo and Amazing Roll-off. I normally stay away from IronX for Polish Aluminum.
Soap and water might not be enough to get everything off. All above mentioned products are not "magic in a bottle". It still requires work on your end with some good quality brushes and time.
If you really want to do this right.... you should clean the wheels while they are off the car. You will have a lot more leverage when they are flat on the ground. You could also clay them with ease at this stage. Once they are clean, you should layer several coats of a high temp tolerant sealant or a coating such as Opti-coat on them. This will make them so much easier to clean next time around.
Good luck.