Quote:
Originally Posted by stratplaya06
Hey guys,
Tried to install my sws-8 subs and alpine pdx 2.150 amp today, and ran into some issues. I was using technic's harness, and when I hooked everything up I had no sound from any speakers, and no gong noise when the door was open. I also found that the AUX, SAT, CD changer and bluetooth functions did not work. I assume this indicated a blown amp. I took the amp out of my car and threw it into my dad's e60 m5, and found it to play just fine, eliminating that as the possible culprit. I tried putting everything back to stock and removing the technic harness, but the problem still persists.
I would assume it is a break in the most-bus, but I looked around and everything was plugged in as it should be. I also have the seats out of the car, registering a SRS warning, as I have the BT tool to get rid of it. I assume there's no way that the seats being out has anything to do with it.
Any ideas?
|
Put the seats back and plugged in. To be blunt, that is not a good way of installing anything in the car.