Quote:
|
Originally Posted by jaymd123
Quote:
Originally Posted by taibanl
You need to have separate ms-8 channels for underseats.
|
I am using CH6 and CH7 of the MS8 for sub left and sub right.
Quote:
Originally Posted by mob17
1) If they are the 4" Dotechs then no, won't do much for the bass
2) for tuning suggestions do a search on the ms-8. Or read the thread titled "guide to level matching"
3) Maybe the sws will benefit from more power. Would be better to bridge them and then have the other 2 channels for your Dotechs. The centre will be loud enough on ms-8 power. But from what you are saying you might prefer to get mid bass drivers instead
I would also set all your crossovers to 200hz@24db, and the subsonic at 40ish hz@24db
|
Thanks for the advice. I'll try your suggestion and look for the guide matching post. I was just under the assumption that all of those required a "tuning CD" in order to adjust. |
Ok. I was thinking "side" left and right
Set your fronts as 2 way with a 45/24db subsonic and a 200/24 high/low pass. Configure as sub:none