FIY for peeps using WW line tap
I installed Vishnu meth kit about a week ago, and since have found that my WW pump filter was gunked up and the BMW WW pump is leaking.
Below is a pic of my filter. It was flowing ok for the most part, but was fairly difficult to prime and this is why.
Second, I was noticing that my consumption seemed high, so when I had the tank pulled I did some tests and noticed the pump was leaking. At first I thought it was the pump grommet, but it's the actual pump. I will be replacing the pump
There's a DIY somewhere about cleaning the filter which will also give you enough info on replacing the pump.
EDIT: i did purchase my car used so not sure what WW fluid was used, but I used 1 half bottle of this nasty cheap blue, thick fluid that could have done this.
FINAL RESULTS: See post #77
Last edited by Joshboody; 10-13-2011 at 12:41 PM..
|