View Single Post
      04-26-2013, 11:01 PM   #73
korell
New Member
0
Rep
5
Posts

Drives: BMW 325i
Join Date: Mar 2013
Location: Huntsville, AL

iTrader: (0)

How to clear yellow warning light

If you have completed this DIY (thanks yakev724) and still get that pesky yellow warning light, I found a way to clear it (credits to Micha from the German e60-forum.de). Apparently the ELV has an internal counter that causes the yellow (and red?) warning light to display. This counter can be reset using EDIABAS ToolSet32. The count is stored in the CAS and needs to be cleared in CAS and ELV. Load CAS.prg in ToolSet32 and run the commands "steuern_elvcounter_cas_loeschen" and "steuern_elvcounter_elv_loeschen".
This procedure may even unlock the locked steering column with red warning light, but I haven't had the red light since I performed the DIY. I'm assuming this because after my steering column was locked and I had towed my car to an indy shop, the mechanic was able to unlock it by "resetting" something.

BTW, this counter reset worked for me, but as with any advice you find on the Internet, you do this at your own risk. Bonjour ;-)
Appreciate 0