Quote:
Originally Posted by oldbmwreader
Taken straight from my history of changes file on my computer, for FRM3, E92:
Welcome light amber led delete:
WL_POL_3R
hart_einschalten to nicht_aktiv
For the amber LED w/ headlight
PWM_POL_BEI_AKTIVEN_AL
wert_03 to wert_04 [this might be low beam]
PWM_POL_BEI_AKTIVEN_FL
wert_03 to wert_04 [this might be high beam]
To turn off the amber LED on parking light:
SL_FKT_MIT_POL
aktiv to nicht_aktiv
Make sure you post back after confirming.
|
I am going to give these a shot. I don't mind the led however the passenger side led is out. Rather than open the headlight and mess with it I would rather code them out as it will look good and clean with the lux v4 I got. Thanks for this. I will report back with an update.