Quote:
Originally Posted by alongdaway
I am finally thinking of pulling the trigger on some wheels. The offset is super conservative. Rears 19x10 et48 & Fronts 19x8.5 et40... My question is will that setup work without rubbing on the strut side, especially in the rear? I think the front will be ok but uncertain about the rear. And I do not want to roll with spacers. Any help is appreciated.....
 |
Hmm... 19x8.5 ET40 should be fine. If you really want it to be aggressive, add a 5-8mm spacer. For the rear in 19x10 with ET48, that seems too tucked in. I believe that will hit your strut. You might want to add a spacer there: 8-12mm. This should prevent rubbing in the strut and sit flush with the fender.