|
After much procrastination, finally installed the homelink/compass mirror. Mirror was from e-bay, retrofit cable was from Tischer.
Had a battle getting the console down, and had done it before without much hassle. Broke the original connector that plugs into the mirror, but retrofit kit had a spare - just had to insert all the wires.
Instead of a straw, I slid a plastic cable tie through the rubber grommet and taped one wire at a time - then pulled through the grommet - tedious but the straws from McDonald's are too big to use effectively.
Homelink programming a snap - compass is next. Glad its done and works!
Thanks to all who published the pin outs for the connectors.
|