[E90Fleet]

BMW SI B65 30 05 January 2006

SUBJECT
CCC: MP3 CD Playback Not Available


MODEL
E60, E61 (5 Series) with SA 609 CCC-Navigation from 3/05 to 9/29/05 vehicle production

E63, E64 (6 Series) from 3/05 to 9/29/05 vehicle production

E90, E91 (3 series)) with SA 609 CCC-Navigation vehicles produced up to 9/29/05


SITUATION
The MP3 option is not available in the audio menu. When an MP3 CD is used, it is not recognized as a valid CD.

CAUSE
The stability of earlier CCC (Car Communication Computer) software did not allow for proper MP3 functionality.

PROCEDURE
On a customer complaint basis only, retrofit MP3 functionality using Progman V20.00 or higher.

Refer to the SI B09 05 01 Coding, Individualization, Programming (CIP), for the "Retrofit" procedure.

Select "MP3" from the retrofit list and follow the on screen instructions for retrofitting MP3 capability.

The service code "KMP3" will be added to the end of the vehicle order as displayed in the Measures Plan.

After the procedure is complete, turn the ignition off and wait 5 minutes or until the driver's switch block LED goes out. Check the functionality of the system.

WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.

Defect Code
65 83 94 23 00


Labor Operation:
Retrofit MP3 (programming/coding

performed as part of a Technical

Campaign)


Labor Operation
Labor Allowance

+00 56 743
4 FRU (E60, E61, E91)

3 FRU (M5, E63, E64, E90)


Labor Operation:
Retrofit MP3


Labor Operation
Labor Allowance

00 56 110
10 FRU (E60, E61, E91)

9 FRU (M5, E63, E64, E90)


+00 56 744
8 FRU (E60, E61, E91)

7 FRU (M5, E63, E64, E90)


Labor Operation:
Retrofit MP3 and program/code control

modules


Labor Operation
Labor Allowance

00 56 111
16 FRU (E60, E61, E91)

15 FRU (M5, E63, E64, E90)


+00 56 745
15 FRU (E60, E61, E91)

14 FRU (M5, E63, E64, E90)


Labor Operation:
Retrofit MP3 and program/code control

modules (including CAS)


Labor Operation
Labor Allowance

00 56 112
17 FRU (E60, E61, E91)

16 FRU (M5, E63, E64, E90)


+00 56 746
16 FRU (E60, E61, E91)

15 FRU (M5, E63, E64, E90)

Note: Should the vehicle be affected at the same time by another repair in which programming of control units is also required, programming may be claimed only once.

Note: The following explanations will spell out the correct use of the work times.

Main Work:
Use this labor operation number when the only repair performed is the listed warranty repair.


OR


+Associated Work:
Use this labor operation number when other repairs or services are performed along with the listed warranty repair.
Under no circumstances should both labor operation numbers be claimed. Attempts to claim both times will result in an unnecessary delay in claim processing and payment.