Quote:
Originally Posted by scubasteve2365
Did you try both blades of that fuse. Only one is going to have a constant 12V. If you did then it might be easier just to pick up one of the add-a-circuit fuse taps I mentioned and just pick a fuse location. Keep going at it until you find constant 12V. There are plenty of sources there in your fuse panel. When you get it the Dynavin will retain it's settings after ignition shut-off and it will automatically come on when you insert the key.
Also, these e9x Dynavin units are exactly the same as the e46 units, except for the dash housing of course. You could probably learn a lot by going over the threads on e46 fanatics.
http://forum.e46fanatics.com/showthread.php?t=793437
http://forum.e46fanatics.com/showthread.php?t=803437
and a nice thread on iGo Primo
http://forum.e46fanatics.com/showthread.php?t=797457
|
I finally found a location that works. Took trying 4 or 5 slots. Unfortunately though, my unit is defective as the RCA AUX inputs don't work correctly. Trent is working to take care of it for me.