[Sensible_]

For those using ICOM.

Make sure firmware is updated to same as ISID version in this case 3.1

 Generic ICOM Update Instructions:

1) Setup network adapter to DHCP mode for IP v4
2) Connect ICOM and power on
3) Check network adapter has IP starting like 169.254....
4) Try to ping 169.254.92.38 or use ipconfig in command prompt to find the IP
5) Using web browser go http://169.254.92.38:60080, L/P: root/NZY1150263
6) Select channels menu and make accure lock
7) Go to firmware update and update with ICOM-BootImage-01-11-01.bin, then with ICOM-ApplicationImage-01-15-01.bin, don't reboot between parts.
8) Reboot ICOM, check firmware versions for boot 1.11.01 and application for 1.15.01

Assuming its a clone

You need to register it. You can do it by editing some XML files:

They are in total 4 files you need to create and 1 you need to edit;

Create (XXXXXXX is the serial number) if not created. If already created - edit them with your ICOM serial.

1) p:\apps\wsm\apps\manager\data\DeviceInventory-ICOMXXXXXXX.xml
2) p:\apps\wsm\apps\manager\data\UnitRegistration-ICOMXXXXXXX.xml
3) p:\apps\wsm\apps\agent\data\DeviceInventory-ICOMXXXXXXX.xml
4) p:\apps\wsm\apps\agent\data\UnitRegistration-ICOMXXXXXXX.xml

Edit (just add your icom based on the other one)

1) p:\apps\wsm\apps\manager\data\PXEBootDevices.xml

Or maybe try ITOOLSRADAR attached - change txt to rar.