|
Here's the thing, I can code the NFRM module, in my case i get a 35kb .trc file...I managed to turn off my orange side markers (SIDEMARKER_US_NFRM it was called) and I also managed to get the fob to close the windows/mirrors/sunroof, so that works
what I don't understand is why in this .TRC file for the NFRM module I don't see the commands for LED tail light retrofit which turn off the bulb errors...its the following which I don't get in my NFRM .TRC file:
CC_MELD_BFD_BL,
FEHLERMELDUNG_CC_BFD_L,
FEHLERMELDUNG_CC_BFD_R
I do see the following similar and tried setting them to nicht_aktiv but it didn't help:
CC_MELDUNG_BFD
CC_MELDUNG_BL
Funny thing is I do end up seeing the above required 3 commands from the spreadsheet when I read the entire CAS ecu (229kb .TRC file) but not when I go to the NFRM ecu (35kb .TRC file)...
Basically the lights work but the blinkers are too fast and the lightbulb error in the dash on startup which goes away and isn't annoying..
|