[loihisteve]

I've just migrated to Michelin PS2 tires, and will be installing a set of Koni Sport struts & shocks in a day or two ... I'm not sure where to set the Rear Shocks for my initial install ... I obviously don't want to take them out too often to dial them in, so I thought I'd post an inquiry to see if others might have a similar setup, and what their experience was like dialing them in ... I've got the ZSP suspension, and other than the new tires, my car is basically stock ... I had been leaning towards either going with the factory setting (full-soft), or 1/2-turn from full soft, as my initial setting for the Rears, but after the transition from RFT to non-RFTs (and driving with them for a few days), I'm now thinking I might want to go alittle firmer ... Thanks in Advance.