DIY: Passport X50 A-Pillar Hardwire-Step 1 of 5 -Introduction and wire harness
I hard wired my Passport X50 because I don't like cigarette adapters. I ran the wire down the A-pillar behind the air bag.
Step 1 is to buy the direct wire cord for $10. I removed the fuse link as I was using a fuse tap. I soldered the fuse tap and a ground ring terminal to the harness. I used heat shrink to cover the solder joint.
Last edited by E92Vancouver; 02-02-2008 at 08:49 PM..
|