Quote:
Originally Posted by smallseafishie
No wires for switch. they just go into your HVAC panel and that's that.
You will also need the wiring loom (I made my own) to hook up to the fuse box.
|
Since the Retrofit cable set, 61120398203, is unavailable I will be doing my own wiring from the seat connectors (x275 and x279) to the fuse box as well as from the seat connectors to the seat modules.
Using the schematic diagram in the heated seat retrofit PDF posted earlier in this thread I see the fuse box connections needed are:
x14270: Pin 38 (passenger side O_SHBF)
x14270: Pin 34 (driver side O_SHFA)
x11003: Pin 9 (power from 5A fuse)
I need to source the socket contacts for the 47 pin x14270 connector. Also need a blade terminal contact for the 15 pin x11003 connector.
The other end of these wires will be terminated with the socket contact 61131383776, and plugged into the seat connectors (at the car side).
Do you have part numbers for the x14270 and the x11003 sockets?