View Single Post
      04-07-2012, 09:44 AM   #31
project335i
Banned
Canada
144
Rep
4,501
Posts

Drives: Wide Load
Join Date: Mar 2011
Location: SAUGA

iTrader: (6)

Quote:
Originally Posted by Ghost170
Quote:
Originally Posted by FLOSS View Post
dang, is it just me..or it seems like this thread has some
doubt with my build?!?! Maybe this will help...

[SIZE="5"]First to rock CCWs on an E90, and also first to rock 11" rears!![/SIZE]

[SIZE="2"]and at that time, u folks were still trying to figure out how to fit 10" rears[/SIZE]

[SIZE="5"]And they said 12" rears won't fit an E46 M3[/SIZE]

[SIZE="2"]very little camber, and still able to drive on ///M mode!!
NOTE: above pic are 10" wide with the 245/35 that project335i will be running[/SIZE]


[SIZE="5"]And just for the record...[/SIZE]


so for anyone else that may have some doubts.. let's hear it!!

w00t w00t.. and for those with the kind words, thank u!!

and for project335i, thanks again for ur patience bro!!!



very easy!! it's bc these are acutally the correct wheels
that belong on the car...not 8.5



yeeeeeee baby!!!



yes, 245/35s may be a bit wider...but keep in mind that
ur 225s are 40 series tires (taller). So these smaller/shorter
tires are easier to tuck. it's a perfect example with ur
rear tires... easier to tuck 285/30 compared to ur 265/35s

on my old E90, i was tucking 18x10 +19 with 225/40s...
and i still had abt a finger gap between the inner fender
well to the tire. too mucho stretch brrooooo

no need for 12s.. 11.5s are enough, IMO



-2 degrees of camber, IF THAT!!
yes, your car is stance for life. lets see how your pupil does..!
If you listen and understand the teacher then execution will not be a problem.
Appreciate 0