Quote:
Originally Posted by _Si_
Oh well at least you have confirmed that there is a change and there are no splices there.
Surely the install document should have been updated.. I wonder how I could get my hands on that  |
Ok, so this changes things slightly, but you shouldn't need the new installation guide.
What you need to do is trace these two cables back from the sub to where they are in the sills. You then need to cut both of these wires at a sensible point to tap into.
When cut you can terminate the thin wire leading back to the sub (won't be used) which will leave you with three pairs, similar to that you would see in the pre LCI cars once you remove the splices.
Rich