|
OK, so with the following filters:
- Trunk sub LP 80Hz, 12db
- 2-way front, 200Hz Lo/Hi @ 12db
- Rears HP 100Hz
The midbass ends up at about half of the level it should be at. I tihnk I read somewhere that the MS8 does not believe that more than one "channel" should cover a certain frequency range, maybe that's why it's ignoring the underseat woofers? I will have to try with 24db slopes to see if it makes a difference.
I did the calibration with all gains set to 0.5V (minimum on my amp) and then I raised the gains for the underseats - definitely works.
I dont have an oscilloscpe, but what is the level of the MS8's line outputs, in volts?
|