Quote:
Originally Posted by TTurboBullett
Yes correct, the other Afe version that attaches a snorkel to each inlet port at the front of the car would actually flow less than stock whereas my setup will flow more. My cowl inlet/elbow which was a 2.5" round silicone is enough flow for 1 of the turbos. My setup had 16.5 sq/in of flow area
|
Beautiful, will be doing this, and I probably can get a snorkel made for the cowl instead of using a flex tubbing. On the wish list.....
So I got couple off this on wish list
1) Gasket Seals for the filter cup inlet, and cover. A rubber boot for the stock snorkel to have a sealed connection to the aFe airbox
2) Snorkel for the cowl