[HP Autosport]

Originally Posted by Tag

Harold,

This is from part of the description of the endlinks on your site.

"The swaybar frame mount and the end of the bar should be on the same horizontal plane."

Can you please explain what that means?

Thanks

If you were to measure from a level floor to the frame mount and the endlink mount at the end of the bar, both should be the same distance from the floor, that is the most ideal position for the bar. Any deviation from it will make the bar less effective. However, it's hard to get it perfect because of ride height or other obstructions(control arms, tie rods and etc.) You just want to get those measurements as close as you possibly can.