Quote:
Originally Posted by fccs
Hifi, jvc kw-v30bt, and do I need anything else for normal wiring harness or does this do steering wheel and everything?
|
The connects2 harness does steering wheel controls, it also has a switched 12 volt wire. You just need a constant power source. It's easiest to run a fused power wire to the battery with the fuse as close to the battery as possible.
I'm not sure if this will work for your headunit, but it will plug into the connects2 harness. I couldn't find an ISO harness for mine so I cut the ISO connectors off, and soldered in the harness that came with my headunit. Then I covered it all in heat shrink. This isn't really needed, but it might work.
http://m.ebay.com/itm/260741319554?nav=SEARCH
If you are using the stock hifi amp you need to use the rca inputs. Like how it's done here. The diagram is not exactly the same since he is using the metra harness and a steering wheel adapter, but the pinouts for the rca wires is still the same.
http://www.e90post.com/forums/showthread.php?t=809490