Quote:
Originally Posted by bmw325i
The front will poke 8mm at stock camber (flush at-1.8 degrees camber). The rear will be flush with around -1.8 degrees of camber.
IMO you either need camberplates to get rid of the poke up front or more aggressive offsets in the rear to match. I also think you should go with the 11" rear wheel 11"et40 has the same outer clearance as 10"et28.
I have a prelci but my specs are
9.5et22 245/35/19 -1.8 degrees camber (245 is a tight fit, not recommended but it works)
11et28 275/30/19 -1.9 degrees camber
|
can you post some pictures of this?