Similar swap, questions about moving pins
Not to dig up an old thread but thats what im going to do...
See my attachment, do i basically have the right idea? (i believe i also need the GND, hence PIN8 going to PIN13. and both my seat and car are after 3/2007)
How do i actually move, (or duplicate, as the case may be as i imagine i still need a 12v going to PIN4 and GND to PIN8, for "seat module" right?) the pins?
I'd rather not cut off the harness at attach each wire manually, or is that not possible?
I havent removed the yellow shield from car harness just yet because i want some direction first.
thanks!
|