DIY Request: Removing junction (fuse) box
Hello,
I need to remove fuse box, need access to the back connectors.
In TIS found the picture, saying that's enough to:
1) remove JBE (2 bolts - OK)
2) remove bolts 1 on the picture (4 bolts - OK)
3) remove plastic cover 3 on the picture, hiding nut.
Can't open plastic cover and remove it. Tried in all directions with hand, flat screwdriver etc...
Any ideas? May be somebody has already done it?
As soon as I'll do this - I'll post all pictures and write complete DIY.
Thank you.
|