View Single Post
      10-26-2012, 02:50 AM   #14
doughboy
Major General
doughboy's Avatar
1543
Rep
8,972
Posts

Drives: 2018 M2 Comp 6MT
Join Date: Jan 2009
Location: UK

iTrader: (2)

Quote:
Originally Posted by Phil325i View Post
Don't agree Doughboy. I'm talking about the diameter of the spacer versus the diameter of the (flat face, not chamfered) hub. IMHO the spacer should more or less be the same as that of the flat face of the hub (the face the wheel bolts on to). The OP's is well short of that...

Here's a pic of my H&R - you can see there's much less of a 'gap' between the edge of the spacer and the edge of the hub
But your spacers appear to be well overhanging the chamfered hub face, which starts about 15mm from the hub edge. Theres no point in the spacer being larger than the wheel mating face.

The OPs appear to be about 1mm short of the chamfer ridge, same as mine, to give a nice edge with no overhang.

See pics below:
Attached Images
  
Appreciate 0