|
OK so heres my 2 cents on the job: I noticed pits 200 does not have the stock piping that goes from the intercooler to the chargepipe, before you remove the fan there is a clip on the fan that supports that pipe, so that needs to be taken off to remove the fan. I got the evil box off fairly easy with some wd40 and my smallest screw driver shoved into the plastic guide then I wiggled that side out with the screw driver shoved in between the plastic guide. Then repeat on the other side. Other than that everything was smooth. I have 107k on my car and have been tuned for about 2k.
|