Quote:
Originally Posted by smiley32
I have the car alarm installed, and i found a mirror with FLA without the alarm LED, if you are going to retrofit to FLA, alarm work without red LED from the mirror?
|
Yes it will work.
Install the alarm led is so easy. You have the circuit board and the contact pads at it.
If you want to install the led, you only have to solder it and a resistor. Of course you will have to use your back cover with nose clown too.
Other way is to connect a 12v led at pin 8(+) and 9(-) at the mirror plug and put it wherever you want.
Regards.