I purchased the harness from distantxtremes which comes with no instructions except the following i got from email
HARNESS = VEHICLE
Red Wire with Fuse Holder = Red Wire/White Stripe (POWER)
Red Wire with Insulated Male Spade Terminal = Yellow Wire/Blue Stripe (LOW BEAM WIRE)
White Wire with Insulated Male Spade Terminal = Black Wire/Green Stripe or Blue Wire/Green Stripe (PASSENGER SIDE HALO WIRE)
Black Wire with Ring Terminal = Metal Ground Stud on PASSENGER SIDE (GROUND)
Black Wire with Insulated Male Spade Terminal = Black Wire/Green Stripe or Blue Wire/Green Stripe (DRIVER SIDE HALO WIRE)
So I followed this PDF (
http://www.namotorsports.net/docs/VIE90DRLHarness.pdf)
I've got everything hooked up and now when I put the key fob in and press start. . . none of the halos turn on. But my passenger side headlight is on
(with light switch in the off position)
If I press the lock and unlock button, the passenger side headlight blinks with the beeps.