Quote:
|
Originally Posted by Blowout81
Well sir I am a 3M ppf installer and retailer (clear bra). If the bra was put on, on the factory paint it should not pull any paint off. But it is going to leave a crap load of adhesive (which u will need a body shop grade adhesive remover to get it off as easily as possible) still a pain though. If the bra was put on a bumper that was painted but not in a paint booth and baked on, chances are it will pull the paint off. The adhesive used is very aggressive due to the strecthing u have to do to get it on. Maintainace of the 3M film is usually just like paint. Wash it wax it polish it. Has it's own clearcoat so it shines like the car. And allows the natural sunlight to pass through so ur paint fades evenly.
|
Question.
I had two small rubber inserts behind my license plate that stained the clear 3m bra and Im wanting to take my plate off permanently but dont want the ugly stain.
Do you know of anything that i could use to clear it up or clean it?
Its either that or just cut out those little pieces and put new little inserts in. Which i dont think will look as good.