Quote:
Originally Posted by Najt
I have similiar problem. My prog.files:
* Ediabas 7.3.0, Inpa ea90x, NCSe 3.1.0, daten v.49 (daten and sgdat in ncse, ecu copied to ediabias/ecu
* ini files are configured properly
* Cable is from one-stop shop
I can read and code any ECU, but not TCUM. I always get error:
Error in CABD! Look at CABI.ERR and ERROR.LOG!
COAPI-2020: no answer from ECU
IFH-0009: NO RESPONSE FROM CONTROLUNIT
does it mean that the ECU is dead?
|
Are you sure that you have TCUM?