[E91_AKD]

1. As far as the chips go, if all you see is paint and no primer I would mask off the area 1 inch larger circumference around the affected spot then start with 80 grit till the bevels are knocked down then move to 1000 until the major scratches are knocked down, finish with 1500 or 2000 just to get a smooth feel. (All with water) don’t be afraid of this part. Once you have it wet sanded start your cutting process with a Meguiars 105 cut compound on a blue pad and hit the entire car. Finish with Meguiars 205 and a black pad speed setting around 4. You will have a mirror black once again.

2. My car is black and we can’t take any short cuts like others as far as dusting and pollen, if we wipe we scratch. I would suggest a nice liquid spray on style ceramic as it with help with keep the dust/pollen from even sticking, and if it does then a nice hit from a leave blower or air compressor will shoot it right off then proceed to light wipe in one direction only with an ultra plush towel.