Quote:
Originally Posted by longtran
we have alot of figuring out to do. i tried this last night on my car and it was no plug and play thats for sure. the cic did power up and was running. for some reason i could not get the monitor on. i solder the cable that was cut back together to test it out. its possible that the cable is damage and it wouldnt allow the monitor to power. here are some pics of the back.
|
The monitor use two connectors, one for power/CAN bus and one for video. The monitor will not show anything if you do not have both connectors plugged in. I guess that the soldered video connector is no good... and I hope that the monitor still is fine.
Is the power connector the same between monitors?