Hi,
I am doing the Front and Rear PDC modification and was wondering if you can guide me on how you run the wiring from the PDC control unit to the glove box area. This what i did so far
1. Removed the back seat
2. Removed the side finisher right bolster
3. Removed the inner passenger sil
4. Removed the kick panel underneath glovebox
It seems like I need to remove the carpeting to run the wire underneath so if that is the case I have to remove the passenger seat and the Lateral trim panel front right
Thanks
__________________
15 F06 640i xDrive Gran Coupe/Grey
|