Quote:
|
Originally Posted by robc1976
Quote:
Originally Posted by Game
Pretty sure my coilovers are the same way (KW V1). They're not even at all when it comes to actual threads on the coilovers, but even on the wheel gap. I really don't know what the problem is.
|
Just adjusted mine, keep in mind you have to screw in the strut in the rear in and out (lower/heighten) however you need to so the adjuster is slightly loose when on jack stands. |
I took the whole rear out, adjusted it to three threads on on each side then bolted everything in. The height on each side is significantly different, about 1/2 inch lower on the passenger side. Idk which side is messed up. The lower side or higher. The driver side at three turns from the top has a finger gap. The other sider tAkes 11 turns