Quote:
Originally Posted by VMRWheels
It's very safe. If anything, I believe lug studs can offer much higher tensile strength when compared to lug bolts. I found a place that offers the stud conversion for pretty cheap at Turner Motorsports. Clicking through the link will bring you to the page of available studs in lengths from 75mm to 90mm.
The basic instructions to installing these studs is to make sure the stud holes are clean and free of any debris. Use locktite on the threads, I recommend red, but blue will work as well. Torque the studs down to 16ft/lb and you're all ready to go.
You should be also able to install spacers with ease with these lug studs, as they are much longer and probably can handle 10-15mm spacers with room to spare. |
Oh they are not that expensive either
....like $100 for all the BBS ones. So any of those will work?
EDIT: Also what is the length of the stock lug bolts?