Quote:
Originally Posted by Garrett@Vishnu
I agree, it seems as if the PROcede is losing power momentarily, we recommend that you tap into pin slot 8 on the green power source. I would also recommend running a datalog while parked with the ecu cover off, try moving the wires around while logging to see if the power cuts out while you are adjusting them. Also wouldn't hurt to update to the newest maps and firmware available.
|
If that was the case.....then why does his datalog still show rpm telemetry during the dropout?
Also - did you notice what appears to be two huge ignition timing fluctuations for no apparent reason just prior to the dropout?