|
Hi
If you mean each paddle only has two wires, then 1 wire from each paddle is probably "Earth" and the paddle switch just connects the other to Earth to change gear. If thats the case then join both earths together and connect to the Steering Wheel's earth connector [ Not the Horn - Which looks like an Earth]. Then connect each of the other 2 wires to the middle 2 wires at the gear selector via the slip ring spare contacts as Dave and I have described earlier in the thread.
Hope this helps, but as I have no experience with about Alpina parts, it may completely different, so check everything out first before proceeding - Make sure you disconnect the battery and be careful with your multi-meter not to damage the ECU!!!!
|