|
1. on your e92, there isn't much to roll, as it's already rolled from factory. you can roll the bottom part around teh wheel well or flatten the centre as well. will give you 2-5mm more clearance
2. rolling should be around $100 give or take depending on the place. pm me if you want, and i will reco you the best place in TO. E92s can only roll rear 2 fenders
3. if you think 2-3 mm is going to solve your problem, you might has well add a tiny bit of camber...camber = much better solution for rub on e92. i would say you can still stay near stock spec to gain 2-3mm of clearance...IIRC stock camber is like -1.7 with toe at .15...if you set camber around -2 and tow at around .5 o .10, you will get the wanted clearance and "improve" your car's handling
|