|
If you open NCS Expert, File>load>expertmode.
VIN/ZCS/FA->ZCS/FA f. ECU
E89>ok>CAS>ok
Back
as usual.
At this point, you'd normally F4(Process ECU). INSTEAD, F3(Process Car) then F1 code car. I think at the point you now have the option to change job, so you change it to SG_RESET then run. You'll know it processed the whole car if the list of modules after "get coded:" includes everything you'd expect, like KOMBI,2MULF,IHK,NFRM,etc,etc.
|